Taskers UK Ltd - The Hydraulic Specialists

REDUCES FRICTION AND WEAR Teflon has been called the slipperiest substance in the world. In Tri-Flow it is combined with a complex carrying agent to form a highly durable film. This virtually eliminates wear on moving parts, even under the most abrasive or corrosive conditions. The Teflon particles are spheroid and malleable so do not break down. Tri-Flow resists wear far better than conventional oils and greases. Practical experience has shown that with Tri-Flow the need for reapplication is reduced by up to 90%

DISPLACES ABRASIVE MATTER Solid substances tend not to adhere to a surface treated with Tri-Flow. This is caused by the amazing non-stick characteristics of the special Teflon in Tri-Flow. Dirt, dust, sand and other abrasive matter already present are displaced and then dispersed by the bearing action of the Teflon particles on the moving surfaces. Thus the surfaces are cleaned and subsequently kept clean. Conventional oils and greases combine with foreign matter to form a damaging grinding paste: this is completely avoided with Tri-Flow.

THE MAINTENANCE MAN IN A CAN As a maintenance tool, Tri-Flow helps you to keep expensive plant and equipment in services longer. Tri-Flow reduces the frequency of costly breakdowns caused by worn and dirty parts. Servicing equipment is quicker and easier, and stripping down parts, replacement and re-assembly are all speeded up. Tri-Flow significantly reduces the volume and thus the cost of lubrication on production equipment. In addition, costly stoppages through mechanical failure are greatly reduced.

PROTECTS AGAINST CORROSION Tri-Flow actually displaces moisture and thus prevents the formation of ice, rust and other corrosives. Tri-Flow is acid free, and releases parts previously regarded as seized beyond recovery. Mechanisms that would normally be discarded can thus be brought back into use. Moreover, once Tri-Flow has done its job of freeing the seized or corroded part, its solvents evaporate to leave a tough barrier film which protects and lubricates the surface, guarding against further wear and corrosion.

PENETRATES Tri-Flow has an exceptional low viscosity and surface tension. This causes it to penetrate quickly even into the most inaccessible areas. There, special non-acidic solvents break down carbon deposits, hardened grease, sludge and grimy film. Tri-Flow dissolves the crystalline structure of corrosion caused by moisture, salt alkalis or other agents.

Contact our dedicated sales team to discuss your Tri-Flow Requirements on 0114 2430927